cv::PCA Class Reference

Principal Component Analysis. More...

#include <opencv2/core.hpp>

Public Types
enum	Flags {   DATA_AS_ROW = 0 ,   DATA_AS_COL = 1 ,   USE_AVG = 2 }

Public Member Functions
	PCA ()
	default constructor
	PCA (InputArray data, InputArray mean, int flags, double retainedVariance)
	PCA (InputArray data, InputArray mean, int flags, int maxComponents=0)
Mat	backProject (InputArray vec) const
	Reconstructs vectors from their PC projections.
void	backProject (InputArray vec, OutputArray result) const
PCA &	operator() (InputArray data, InputArray mean, int flags, double retainedVariance)
PCA &	operator() (InputArray data, InputArray mean, int flags, int maxComponents=0)
	performs PCA
Mat	project (InputArray vec) const
	Projects vector(s) to the principal component subspace.
void	project (InputArray vec, OutputArray result) const
void	read (const FileNode &fn)
	load PCA objects
void	write (FileStorage &fs) const
	write PCA objects

Public Attributes
Mat	eigenvalues
	eigenvalues of the covariation matrix
Mat	eigenvectors
	eigenvectors of the covariation matrix
Mat	mean
	mean value subtracted before the projection and added after the back projection

Detailed Description

Principal Component Analysis.

The class is used to calculate a special basis for a set of vectors. The basis will consist of eigenvectors of the covariance matrix calculated from the input set of vectors. The class PCA can also transform vectors to/from the new coordinate space defined by the basis. Usually, in this new coordinate system, each vector from the original set (and any linear combination of such vectors) can be quite accurately approximated by taking its first few components, corresponding to the eigenvectors of the largest eigenvalues of the covariance matrix. Geometrically it means that you calculate a projection of the vector to a subspace formed by a few eigenvectors corresponding to the dominant eigenvalues of the covariance matrix. And usually such a projection is very close to the original vector. So, you can represent the original vector from a high-dimensional space with a much shorter vector consisting of the projected vector's coordinates in the subspace. Such a transformation is also known as Karhunen-Loeve Transform, or KLT. See http://en.wikipedia.org/wiki/Principal_component_analysis

The sample below is the function that takes two matrices. The first function stores a set of vectors (a row per vector) that is used to calculate PCA. The second function stores another "test" set of vectors (a row per vector). First, these vectors are compressed with PCA, then reconstructed back, and then the reconstruction error norm is computed and printed for each vector. :

using namespace cv;
 
PCA compressPCA(const Mat& pcaset, int maxComponents,
                const Mat& testset, Mat& compressed)
{
    PCA pca(pcaset, // pass the data
            Mat(), // we do not have a pre-computed mean vector,
                   // so let the PCA engine to compute it
            PCA::DATA_AS_ROW, // indicate that the vectors
                                // are stored as matrix rows
                                // (use PCA::DATA_AS_COL if the vectors are
                                // the matrix columns)
            maxComponents // specify, how many principal components to retain
            );
    // if there is no test data, just return the computed basis, ready-to-use
    if( !testset.data )
        return pca;
    CV_Assert( testset.cols == pcaset.cols );
 
    compressed.create(testset.rows, maxComponents, testset.type());
 
    Mat reconstructed;
    for( int i = 0; i < testset.rows; i++ )
    {
        Mat vec = testset.row(i), coeffs = compressed.row(i), reconstructed;
        // compress the vector, the result will be stored
        // in the i-th row of the output matrix
        pca.project(vec, coeffs);
        // and then reconstruct it
        pca.backProject(coeffs, reconstructed);
        // and measure the error
        printf("%d. diff = %g\n", i, norm(vec, reconstructed, NORM_L2));
    }
    return pca;
}

See also

calcCovarMatrix, mulTransposed, SVD, dft, dct

Examples

samples/cpp/pca.cpp, and samples/cpp/tutorial_code/ml/introduction_to_pca/introduction_to_pca.cpp.

Member Enumeration Documentation

Flags

enum cv::PCA::Flags

Enumerator
DATA_AS_ROW	indicates that the input samples are stored as matrix rows
DATA_AS_COL	indicates that the input samples are stored as matrix columns
USE_AVG

Constructor & Destructor Documentation

PCA() [1/3]

cv::PCA::PCA

(

)

default constructor

The default constructor initializes an empty PCA structure. The other constructors initialize the structure and call PCA::operator()().

PCA() [2/3]

cv::PCA::PCA	(	InputArray	data,
		InputArray	mean,
		int	flags,
		int	maxComponents = 0
	)

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

Parameters

data	input samples stored as matrix rows or matrix columns.
mean	optional mean value; if the matrix is empty (noArray()), the mean is computed from the data.
flags	operation flags; currently the parameter is only used to specify the data layout (PCA::Flags)
maxComponents	maximum number of components that PCA should retain; by default, all the components are retained.

PCA() [3/3]

cv::PCA::PCA	(	InputArray	data,
		InputArray	mean,
		int	flags,
		double	retainedVariance
	)

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

Parameters

data	input samples stored as matrix rows or matrix columns.
mean	optional mean value; if the matrix is empty (noArray()), the mean is computed from the data.
flags	operation flags; currently the parameter is only used to specify the data layout (PCA::Flags)
retainedVariance	Percentage of variance that PCA should retain. Using this parameter will let the PCA decided how many components to retain but it will always keep at least 2.

Member Function Documentation

backProject() [1/2]

Mat cv::PCA::backProject

(

InputArray

vec

)

const

Reconstructs vectors from their PC projections.

The methods are inverse operations to PCA::project. They take PC coordinates of projected vectors and reconstruct the original vectors. Unless all the principal components have been retained, the reconstructed vectors are different from the originals. But typically, the difference is small if the number of components is large enough (but still much smaller than the original vector dimensionality). As a result, PCA is used.

Parameters

vec	coordinates of the vectors in the principal component subspace, the layout and size are the same as of PCA::project output vectors.

backProject() [2/2]

void cv::PCA::backProject	(	InputArray	vec,
		OutputArray	result
	)		const

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

Parameters

vec	coordinates of the vectors in the principal component subspace, the layout and size are the same as of PCA::project output vectors.
result	reconstructed vectors; the layout and size are the same as of PCA::project input vectors.

operator()() [1/2]

PCA & cv::PCA::operator()	(	InputArray	data,
		InputArray	mean,
		int	flags,
		double	retainedVariance
	)

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

Parameters

data	input samples stored as the matrix rows or as the matrix columns.
mean	optional mean value; if the matrix is empty (noArray()), the mean is computed from the data.
flags	operation flags; currently the parameter is only used to specify the data layout. (PCA::Flags)
retainedVariance	Percentage of variance that PCA should retain. Using this parameter will let the PCA decided how many components to retain but it will always keep at least 2.

operator()() [2/2]

PCA & cv::PCA::operator()	(	InputArray	data,
		InputArray	mean,
		int	flags,
		int	maxComponents = 0
	)

performs PCA

The operator performs PCA of the supplied dataset. It is safe to reuse the same PCA structure for multiple datasets. That is, if the structure has been previously used with another dataset, the existing internal data is reclaimed and the new eigenvalues, eigenvectors and mean are allocated and computed.

The computed eigenvalues are sorted from the largest to the smallest and the corresponding eigenvectors are stored as eigenvectors rows.

Parameters

data	input samples stored as the matrix rows or as the matrix columns.
mean	optional mean value; if the matrix is empty (noArray()), the mean is computed from the data.
flags	operation flags; currently the parameter is only used to specify the data layout. (Flags)
maxComponents	maximum number of components that PCA should retain; by default, all the components are retained.

project() [1/2]

Mat cv::PCA::project

(

InputArray

vec

)

const

Projects vector(s) to the principal component subspace.

The methods project one or more vectors to the principal component subspace, where each vector projection is represented by coefficients in the principal component basis. The first form of the method returns the matrix that the second form writes to the result. So the first form can be used as a part of expression while the second form can be more efficient in a processing loop.

Parameters

vec	input vector(s); must have the same dimensionality and the same layout as the input data used at PCA phase, that is, if DATA_AS_ROW are specified, then vec.cols==data.cols (vector dimensionality) and vec.rows is the number of vectors to project, and the same is true for the PCA::DATA_AS_COL case.

project() [2/2]

void cv::PCA::project	(	InputArray	vec,
		OutputArray	result
	)		const

This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

Parameters

vec	input vector(s); must have the same dimensionality and the same layout as the input data used at PCA phase, that is, if DATA_AS_ROW are specified, then vec.cols==data.cols (vector dimensionality) and vec.rows is the number of vectors to project, and the same is true for the PCA::DATA_AS_COL case.
result	output vectors; in case of PCA::DATA_AS_COL, the output matrix has as many columns as the number of input vectors, this means that result.cols==vec.cols and the number of rows match the number of principal components (for example, maxComponents parameter passed to the constructor).

read()

void cv::PCA::read

(

const FileNode &

fn

)

load PCA objects

Loads eigenvalues eigenvectors and mean from specified FileNode

write()

void cv::PCA::write

(

FileStorage &

fs

)

const

write PCA objects

Writes eigenvalues eigenvectors and mean to specified FileStorage

Member Data Documentation

eigenvalues

Mat cv::PCA::eigenvalues

eigenvalues of the covariation matrix

eigenvectors

Mat cv::PCA::eigenvectors

eigenvectors of the covariation matrix

mean

Mat cv::PCA::mean

mean value subtracted before the projection and added after the back projection

---

The documentation for this class was generated from the following file:

• opencv2/core.hpp